Use Case · Transfer Stations

Digital Waste Tracking Software for Transfer Stations

Skips, tippers, trade vans and cash customers through one gate. Clean loads become WTNs and Defra submissions on their own, and every sorted fraction is documented on the way out.

  • GOV.UK listed DWT software
  • Works with your weighbridge
  • Automatic WTNs and DWT
A skip lorry on a transfer station weighbridge in front of a sorting shed with wood, metal and inert bays, with the load submitted to Digital Waste TrackingWOODMETALINERTWEIGHBRIDGELOAD RECEIVED · 08:05Mixed C&D wasteEWC 17 09 04 · 8-yard skipNet weight3.86 tSubmitted to DWTRDF out · 19 12 10

Why transfer stations are different.

More vehicles, more customers, more codes and more destinations than most receiving sites. The paperwork scales with every one of them.

Every kind of vehicle

Skips, RoRos, tippers, caged vans and cars with trailers, all through the same gate, and every one needs a record.

Regulars and one-offs, all day

Account customers you see every morning, plus cash trade you will never see again. Both need a WTN and a Defra submission.

Mixed loads, many codes

Mixed C&D, soils, wood, plasterboard, metals. The code changes load to load, and it has to be one your permit allows.

Hazardous streams

If your permit takes asbestos, fridges or other hazardous waste, those loads need consignment notes, not standard WTNs.

Loads out to many destinations

Every sorted fraction leaves for a different site: residual to EfW, wood to biomass, metal to the merchant. Each load needs its own note.

Returns by code

Your waste returns need tonnage in and out by EWC code, by customer and by destination.

Gate automation

Only the exceptions need a person.

On a busy gate, you shouldn't have to check every complete record by hand. Loads with everything in place become WTNs and Defra submissions automatically. The handful that are missing something wait in one queue, each with the reason.

  • Weighbridge tickets picked up by Gatehouse; those matching your templates become WTNs automatically
  • Loads that pass every check become WTNs with no one touching them
  • DWT Auto Submit sends them to Defra and stores the receipt ID
  • Anything missing goes to Flagged For Review, with the reason
  • A daily run clears what is ready and emails you a report
How Gate Auto Processing works →
A day at the gate: 136 of 142 loads became WTNs and DWT submissions automatically, 6 flagged for reviewTODAY AT THE GATELoads logged142WTNs created automatically136Submitted to Defra DWT136FLAGGED FOR REVIEW · 6Missing carrier registration4No EWC code2Only the flagged loads need a person · run report emailed daily

From the gate to the Defra receipt.

What happens to a skip of mixed waste at a transfer station running WasteBolt.

Waste in

  • Mixed construction & demolition17 09 04
  • Soil & stones17 05 04
  • Concrete, bricks & tiles17 01 07
  • Wood17 02 01
  • Plasterboard17 08 02
  • Mixed municipal waste20 03 01

Weight

Weighbridge ticket picked up by Gatehouse, or a net weight on a Hot Pick.

WasteBolt

Customer's template fills the rest. Ready loads become WTNs; anything missing is flagged.

Defra DWT

Submitted automatically or in one click. Receipt ID stored for audit.

Codes shown are the common ones. For construction and demolition streams, see our EWC codes for C&D waste guide.

One hub for everything in and out.

Every lane at the gate coming in, every sorted fraction going out. One account, one set of records, one report.

In

  • Weighbridge via GatehouseTickets picked up from your weighbridge software automatically.
  • Gate Hot PicksRegular accounts and your own skips in one input.
  • Straight SubmitOne-off and cash loads, straight to Defra.
  • Linked and Snap & GoNotes from carriers, digital or photographed paper.
WasteBoltWTNs · consignment notes · DWT · reports

Out

  • Residual and RDFTo energy from waste or landfill, e.g. 19 12 10 (RDF) or 19 12 12.
  • WoodTo biomass or panelboard, e.g. 19 12 07.
  • MetalsTo the metal merchant, e.g. 19 12 02.
  • Hardcore and soilsTo aggregates or restoration, e.g. 19 12 09.

Sending it on? It depends where it's going.

To a site on WasteBoltWasteBolt LinkedSend the note through Linked. It lands in their account ready to receive, with nothing re-keyed at either end.
To any other permitted siteStandard transfer noteRaise the WTN from the same account, usually under a 19 12 code once sorted. Check their permit covers it.
Hazardous fractionsAsbestos, fridges, other hazardous wasteA hazardous consignment note, signed on screen, if your permit lets you take them.

The receiving site reports your outbound loads to Digital Waste Tracking. Your side is the Duty of Care paperwork, kept with the rest of the site's records.

How it works at a transfer station.

Set up your customers once, then let the gate run itself.

01

Set up customers once

Accounts, carriers and the code for each stream they bring. Regular routes and your own skips become Hot Pick cards at the gate.

02

Loads come in

Gatehouse picks up weighbridge tickets, regulars are a tap and a weight on Hot Picks, and one-offs go through Straight Submit.

03

Clean loads process themselves

Loads that pass every check become WTNs and are submitted to Defra automatically. Only the exceptions wait for a person.

04

Report in and out

Tonnage by customer, code and destination for your waste returns, exported as CSV or PDF. Ask Bolt AI for anything else.

Pick the route that fits your site.

Same records and the same Defra submission, whichever way the loads come in.

No weighbridge, or a basic one

Small independent site

Hot Picks for regulars and Straight Submit for one-offs, from the office PC or a phone at the gate.

Small transfer station guide →

Weighbridge running all day

Busy weighbridge site

Gatehouse watches your weighbridge export, and tickets that match your templates become WTNs and DWT submissions without re-keying.

How Gatehouse works →

Your skips, your yard

Skip hire with its own tip

Collect with digital WTNs on the driver’s phone, tip at your own station, and submit the load to Defra from the same account.

Skip hire software →

DWT is live for permitted transfer stations

Permitted waste receiving sites in England and Wales have had to report every load to Defra's Digital Waste Tracking service since 1 October 2026. Scotland and Northern Ireland follow on 1 January 2027. Your waste transfer notes and consignment notes still apply alongside it.

How WasteBolt's digital waste tracking software works

Transfer Station FAQ.

Questions we hear from transfer station operators.

Do waste transfer stations have to use Digital Waste Tracking?

Yes, if the site is permitted and receives waste. Permitted receiving sites, including transfer stations, must report every load of waste they take in to Defra's Digital Waste Tracking service: in England and Wales since 1 October 2026, and in Scotland and Northern Ireland from 1 January 2027. If you operate under a waste exemption rather than a permit, check the current Defra guidance on when exempt sites are brought in.

Will it work with our weighbridge software?

In most cases, yes. Gatehouse watches the folder your weighbridge software exports to, and tickets that match your import templates become WTNs automatically, and any system that can export a CSV can be imported with saved column mappings.

Do we have to check every load by hand?

No. Loads that pass every check can become WTNs automatically, and DWT Auto Submit can send them to Defra. Anything missing a detail goes to Flagged For Review with the reason, and a daily run clears whatever has become ready.

How do we handle one-off cash customers?

Straight Submit takes the details of a one-off load and submits it straight to Defra, and WasteBolt builds the WTN afterwards. If they become regulars, save them as a Hot Pick.

Do we report our outbound loads to Digital Waste Tracking?

No. DWT reporting falls on the site that receives the waste, so your outbound loads are reported by the sites you send them to. Your side is the Duty of Care transfer note, which you raise from the same account. If the receiving site uses WasteBolt, you can send it the note through Linked.

Can we take hazardous waste?

If your permit allows it, yes. WasteBolt creates hazardous waste consignment notes, signed on screen, alongside your standard WTNs.

What if we don't have time to run it ourselves?

Our Done For You service handles DWT submission for you, using the same WasteBolt account so your records stay in one place.

Put tomorrow's first skip through it.

Set up your regular accounts, run a day's loads and see which ones need you. 30-day free trial, no credit card.