Use Case · Anaerobic Digestion
Digital Waste Tracking Software for Anaerobic Digestion
Every tanker of slurry, food waste and processing residue logged and reported to Defra in a single input, with or without a weighbridge. Then everything leaving the plant, from the same account.
- GOV.UK listed DWT software
- Weighbridge optional
- One input for repeat loads
Why AD plants are different.
A transfer station takes mixed loads from anyone. An AD plant takes the same few feedstocks from the same suppliers, all day, every day. That changes what good tracking looks like.
Dozens of repeat tanker loads
The same farms and food businesses send the same feedstock day after day. Filling in the same producer, carrier and code for every one is where the hours go.
A different EWC code per feedstock
Slurry, source-segregated food waste, fruit and veg rejects and meat processing residues all carry their own codes. One wrong default and every load that day is wrong.
Animal by-product rules on top
Catering and processing waste can also be Category 3 ABP, so your waste records have to match your APHA approval and ABP documents.
Weighbridge or no weighbridge
Some plants weigh every tanker. Plenty of on-farm plants have no weighbridge at all. Either way, logging a load should take seconds.
Waste going back out
Digestate, depackaging rejects and CHP oils all leave the site. Whether digestate is waste depends on what went in, and when it is, every load needs a note.
Gate Hot Picks
One input per load. That's it.
Your feedstock comes from the same suppliers, in the same vehicles, under the same code. So set it up once. Each supplier and feedstock becomes a Hot Pick card, and logging a tanker is a tap and a net weight. No weighbridge required.
- One saved card per supplier and feedstock
- Producer, carrier, EWC code, description and vehicle come from the template
- Type the net weight, tap Log load, done
- Becomes a WTN and a DWT submission automatically when it passes every check
- Favourites shared across the whole gate team
From the gate to the Defra receipt.
What happens to a feedstock load on an AD plant running WasteBolt.
Feedstock in
- Cattle & pig slurry, manure
02 01 06 - Source-segregated food waste
20 01 08 - Fruit & veg processing rejects
02 03 04 - Meat & fish processing residues
02 02 03
Weight
Net weight typed on a Hot Pick, or a ticket from your weighbridge.
WasteBolt
Everything else filled from the supplier's template. WTN created, carrier registration checked.
Defra DWT
Load submitted. Receipt ID stored on the record for audit.
Codes shown are the common ones. The full list of input and output codes is in our EWC codes for AD plants guide.
One hub for everything in and out.
Feedstock coming in, digestate and site waste going out. One account, one set of records, one report.
In
- Gate Hot PicksRepeat feedstock loads in one input.
- Weighbridge importCSV exports or a Gatehouse sync, if you have one.
- Notes from carriersReceived straight from hauliers on WasteBolt Linked.
- Paper notesPhotographed and read with Snap & Go.
Out
- DigestateTransfer notes for any digestate that leaves as waste, e.g. 19 06 04 or 19 06 06.
- Depackaging rejectsPlastics and packaging from food waste reception, e.g. 19 12 04.
- CHP waste oilHazardous consignment notes, e.g. 13 02 05*.
- Everything elseGeneral site waste on standard transfer notes.
Is your digestate waste? It depends on what went in.
This is the position in England. Scotland, Wales and Northern Ireland have their own rules, and position statements are updated, so check the current position for your feedstock mix.
How it works on an AD plant.
Set up once per feedstock, then each load is one input.
Set up each feedstock once
Save a template per supplier and stream: producer, carrier, EWC code and description. Each one becomes a Hot Pick card at the gate.
Log the load
No weighbridge? Tap the Hot Pick and type the net weight. Got one? Import its export or connect it through Gatehouse.
WasteBolt reports it to Defra
Each load becomes a WTN and is submitted to the Digital Waste Tracking service. The receipt ID is stored against the load.
Report in and out
Tonnage by supplier, feedstock and EWC code, plus everything that left site, for permit returns and audits. Export as CSV or PDF.
Pick the route that fits your plant.
Same records and the same Defra submission, whichever way the loads come in.
No weighbridge needed
On-farm AD
A Hot Pick for each supplier and a phone or office PC is all it takes. Type the net weight and the record is done.
How Gate Hot Picks works →Weighbridge running all day
Merchant food waste AD
Import your weighbridge export or connect it with Gatehouse so every ticket that matches a template becomes a WTN and DWT submission without re-keying.
How Gatehouse works →Carriers bring their own paperwork
Supplied by hauliers
Carriers on WasteBolt can pass their notes straight to you with Linked. Paper notes can be photographed and read with Snap & Go.
About WasteBolt Linked →DWT is live for permitted AD plants
Permitted waste receiving sites in England and Wales have had to report every load to Defra's Digital Waste Tracking service since 1 October 2026. Scotland and Northern Ireland follow on 1 January 2027. Your waste transfer notes and ABP paperwork still apply alongside it.
How WasteBolt's digital waste tracking software worksAD Plant FAQ.
Questions we hear from AD operators.
Do anaerobic digestion plants have to use Digital Waste Tracking?
Yes, if the plant is a permitted site that receives waste. Permitted receiving sites, including AD plants, must report every load of waste they take in to Defra's Digital Waste Tracking service: in England and Wales since 1 October 2026, and in Scotland and Northern Ireland from 1 January 2027. A farm digesting only its own slurry and crops, which are not waste, may have nothing to report. If you are unsure, check with your regulator.
Do we need a weighbridge to use WasteBolt?
No. Without a weighbridge, set up a Gate Hot Pick for each supplier and feedstock and the only thing you type per load is the net weight. If you do have a weighbridge, you can import its exports or connect it through Gatehouse instead.
Do we still need waste transfer notes for feedstock deliveries?
Yes. Digital Waste Tracking sits alongside your Duty of Care; it does not replace it. Every transfer still needs a waste transfer note. WasteBolt builds the note for each load from that supplier's saved template, so there is nothing extra to fill in.
Will WasteBolt work with our weighbridge?
In most cases, yes. Any weighbridge system that can export a CSV can be imported with saved column mappings, and Gatehouse can sync directly with supported weighbridge software so loads flow through automatically.
Is our digestate waste?
It depends on what went into the digester. Digestate from farm feedstocks only, such as manure, slurry and silage, is generally covered by Environment Agency position statements. Digestate from waste feedstocks is waste unless it is certified to PAS 110 and meets the end-of-waste requirements; if it is still waste, it needs a transfer note, under 19 06 04 or 19 06 06 depending on the feedstock. Rules differ in Scotland, Wales and Northern Ireland, and position statements change, so check the current position for your feedstock mix.
Can we manage the waste leaving the plant in WasteBolt too?
Yes. Digestate, depackaging rejects, CHP waste oils and general site waste can all be documented from the same account, with hazardous consignment notes where needed. Your records for everything in and out sit in one place.
Does WasteBolt replace our ABP paperwork?
No. WasteBolt records the waste side of each load: EWC code, description and quantities. Your APHA approval and ABP commercial documents stay as they are, and Digital Waste Tracking does not replace them either.
What if we don't have time to run it ourselves?
Our Done For You service handles DWT submission for you, using the same WasteBolt account so your records stay in one place.