Use Case · Quarries

Digital Waste Tracking Software for Quarries

Soils and rubble in for restoration, reported to Defra straight from the weighbridge. Aggregate sales kept out of it, and rejected loads documented on the way back out.

  • GOV.UK listed DWT software
  • Waste and sales kept apart
  • Works with your weighbridge
A tipper of soil on a quarry weighbridge beside quarry benches being restored with inert waste, and an aggregate stockpile for saleRESTORATIONSALESWEIGHBRIDGELOAD RECEIVED · 08:20Muckaway soilEWC 17 05 04 · Housing siteNet weight18.40 tSubmitted to DWTAggregate sales · not waste

Why quarries are different.

A quarry sells product over the same weighbridge it takes waste in on. Digital Waste Tracking only wants one of them.

Waste in, product out, one weighbridge

The same weighbridge weighs soils coming in for restoration and aggregate going out for sale. Only one of those is waste.

Muckaway from every job

Groundworks and demolition hauliers bring load after load from the same development, all on the same code.

Inert means inert

Plastic, wood or anything else that isn’t inert can’t go in the void. The record has to show what you accepted.

Rejected loads go back out

A contaminated load turned away at the face leaves as waste, and needs its own note when it does.

Restoration on a permit

Your permit sets what can go in the void. Your returns need tonnage by code and customer to show it.

Recycled aggregates

Crushing and screening on site turns waste into product, but only when it meets the end-of-waste rules.

One weighbridge, two flows

Waste in. Sales out. Kept apart.

Your weighbridge doesn't care whether a load is muckaway or Type 1. Your waste records do. WasteBolt takes the waste tickets, turns them into WTNs and Defra submissions, and leaves your sales where they are.

  • Only the waste tickets become WTNs and Defra submissions
  • Pick the waste rows when you import, or let import templates match your waste materials
  • Anything that doesn’t match waits for review instead of being sent
  • Gate Hot Picks for regular hauliers and jobs, if you log at the gate
  • Aggregate sales and the aggregates levy stay in your weighbridge or sales system
How weighbridge CSV import works →
A day's weighbridge tickets at a quarry: waste loads become WTNs and DWT submissions, aggregate sales stay outTODAY'S WEIGHBRIDGE TICKETSMuckaway soil17 05 04 · Housing site18.40 tWTN · DWTType 1 sub-baseAggregate sale20.10 tSaleCrushed concrete17 01 07 · Demolition job19.60 tWTN · DWT20mm clean stoneAggregate sale19.80 tSaleSoil & stones17 05 04 · Road scheme17.90 tWTN · DWT3 of 5 tickets are waste and go to DefraSales stay in your weighbridge system, not in your waste records

From the weighbridge to the Defra receipt.

What happens to a load of inert waste at a quarry running WasteBolt.

Inert waste in

  • Soil & stones (construction)17 05 04
  • Soil & stones (gardens & parks)20 02 02
  • Concrete, bricks & tiles17 01 07
  • Concrete17 01 01
  • Bricks17 01 02
  • Screened minerals from treatment19 12 09

Weighbridge

Waste tickets picked up or imported. Sales tickets left out.

WasteBolt

The haulier's and job's template fills the rest. WTN created, carrier registration checked.

Defra DWT

Submitted automatically or in one click. Receipt ID stored for audit.

Codes shown are the common inert ones. Look up any other in our free EWC code list.

One hub for everything in and out.

Every waste load coming in, every rejected load going out. One account, one set of records, one report.

In

  • Weighbridge waste ticketsPicked up or imported, without the sales tickets.
  • Gate Hot PicksRegular hauliers and jobs, one input each.
  • Notes from hauliersPassed to you through WasteBolt Linked.
  • Paper notesPhotographed and read with Snap & Go.
WasteBoltWTNs · DWT · reports

Out

  • Rejected loadsContaminated loads back out on a WTN, e.g. 17 09 04.
  • Screening rejectsFrom crushing and screening, e.g. 19 12 12.
  • Everything elseSite waste on standard transfer notes.

Leaving site? It depends what it is.

Primary aggregate salesNot wasteStays in your weighbridge or sales system, never on a WTN or a DWT submission. Recycled aggregate is covered on our inert recycling page.
Rejected or contaminated loadsStill wasteA WTN for each load sent back or on to a permitted site, usually under a 17 code such as 17 09 04.
Screening rejectsStill wasteA WTN for each load to the site that takes it, e.g. 19 12 12.

This is the position in England. Scotland, Wales and Northern Ireland have their own rules, so check the current position for your site.

How it works at a quarry.

Set up your hauliers and jobs once, then let the weighbridge do the work.

01

Set up hauliers and jobs

A template for each haulier, job and waste material your permit allows, matched to your weighbridge tickets.

02

Weigh it in

Waste tickets picked up or imported, sales left out. Regular loads at the gate on Hot Picks.

03

WasteBolt reports it to Defra

Each waste load becomes a WTN and is submitted to Digital Waste Tracking. The receipt ID is stored against it.

04

Report for your permit

Tonnage into the void by code, customer and date, exported as CSV or PDF for your returns.

Pick the route that fits your quarry.

Same records and the same Defra submission, however your site is permitted.

Weighbridge for sales and waste

Restoration quarry

Import your weighbridge export or connect it through Gatehouse, with only the waste rows becoming WTNs.

Weighbridge CSV import →

Permitted as a landfill

Inert landfill in a quarry

The same gate automation as a landfill: clean loads to Defra on their own, exceptions flagged with the reason.

Landfill use case →

Crushing and screening on site

Quarry with a recycling plant

C&D waste in on WTNs and DWT, screening rejects out on notes, recycled aggregate out as product.

Inert recycling use case →

DWT is live for permitted quarries

Permitted waste receiving sites in England and Wales have had to report every load of waste to Defra's Digital Waste Tracking service since 1 October 2026, including quarries taking inert waste for restoration. Scotland and Northern Ireland follow on 1 January 2027.

How WasteBolt's digital waste tracking software works

Quarry FAQ.

Questions we hear from quarry and restoration operators.

Do quarries have to use Digital Waste Tracking?

Yes, if your quarry is permitted to receive waste, whether for restoration, as an inert landfill or for recycling. Permitted receiving sites must report every load of waste to Defra's Digital Waste Tracking service: in England and Wales since 1 October 2026, and in Scotland and Northern Ireland from 1 January 2027. Primary aggregate you sell isn't waste. If you use waste under an exemption rather than a permit, check the current Defra guidance.

Will our aggregate sales end up in Digital Waste Tracking?

No. Only waste loads become WTNs and Defra submissions. When you import a weighbridge export you choose the rows to bring in, and automatic processing only turns rows that match your waste templates into WTNs. Anything else waits for review.

Does WasteBolt handle the aggregates levy?

No. Aggregate sales and the aggregates levy stay in your weighbridge or sales system. WasteBolt handles the waste side: WTNs, Digital Waste Tracking and reporting on what went into the void.

Which EWC code do we use for muckaway?

Soil and stones from construction sites are usually 17 05 04, and from gardens and parks 20 02 02. Screened soil from a treatment site is usually 19 12 09. Whatever the code, the load has to be inert and one your permit allows.

What about loads we reject?

A rejected load is still waste when it leaves your site. Raise a WTN for it from the same account, back to the haulier or on to a permitted site that can take it.

Will it work with our weighbridge software?

In most cases, yes. Any weighbridge system that can export a CSV can be imported with saved column mappings, and Gatehouse can pick up exports from your weighbridge folder automatically.

What if we don't have time to run it ourselves?

Our Done For You service handles DWT submission for you, using the same WasteBolt account so your records stay in one place.

Run tomorrow's tickets through it.

Import a day's weighbridge export, keep the sales out and see the waste loads reach Defra. 30-day free trial, no credit card.